D - Hawke Connector
D - Hawke Connector
D - Hawke Connector

InstrumEx | Ex de | Connector

The InstrumEx design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. This connector is available in 4, 8 and 9 way configurations , up to 2.5mm contacts and allows for a maximum of 250V, 10A. Made from brass nickel plated or stainless steel material it includes an integral cable glands which not only make the connector smaller it also allows it to be cheaper than its competitors while still maintaining the durability required in hazardous area applications.

  • Pre-Terminated
  • Electrical Insert With Key - Easy to assemble electrical insert allows crimped or soldered connections
  • Integral Keying - Machined key and keyway ensures connector alignment
  • Unique 5 position insert keying system prevents cross-mating
  • Quick Connect - Unique 4 start ACME thread offers a smooth and quick fully mating action in less than two turns
  • Earth continuity is achieved via a 360° contact clip
  • Keyed Positions - Secondary keying on the actual insert bodies guarantees contact alignment, preventing pin damage
  • Anti-rotation - Profiled Spigot and connector body prevent cable rotation, eliminating cable damage.

The 4-way and the 9-way options will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current of 10A (AC1) at 250V AC and 2.5A (DC1) 60V DC. The 8-way option, designed predominantly for Ethernet applications, will accept cores ranging between 0.14mm² and 0.37mm² and can carry 1A (AC1) at 60V AC and 0.5A (DC1) 60V DC.For order codes, dimensions, insert selection and dissipated wattage calculations please download the InstrumEx Datasheet from the 'resources' section of this page.

 

 

 

 

 

ControlEx | Ex d | Connector

The ControlEx connector range is our most versatile option, suitable for control and low/medium power applications. With a wide range of insert configurations, this connector allows Hawke to tailor a connector solution to the customer’s needs. The robust stainless steel body can hold up to 60 contacts and will accept conductor sizes ranging between 0.5mm² and 35mm², operating up to 125A and 750V dependent on contact arrangement and certification approvals.

  • Easily Fieldwireable - Pin and socket inserts are front and back to assist wiring and avoid termination errors
  • Internal Keyway Spacer - Eases accessibility for termination
  • Locking Pin - Optional locking pin provides the facility for mated connectors to be permanently locked
  • Keying Position - Eliminates the possibility of misconnection of adjacent circuits
  • Running Coupler - Allows the connector to be installed onto a pre-assembled cable gland
  • ACME Thread at Mating Interface - Unique ACME thread offers a smooth and quick fully mating action
  • Fully Inspectable Flameproof Barrier - Provides direct inspection of the flameproof seal
  • Anti-Rotation Device - helps to eliminate the possibility of the gland loosening

 

 

 

 

PowerEx | Ex d | Connector

The PowerEx range of connectors have been designed specifically for the extremely demanding requirements of higher power applications. Inserts are available with 1 to 4 contacts with a conductor acceptance range of between 50mm2 and 630mm2 operating up to 780A and 750V as standard. Other voltages available on special request.

  • Running Coupler - Allows the connector to be installed onto a pre-assembled cable gland
  • Keying Position - The unique visual 5 position insert keying system along with the the integral machined keyway prevents contact damage and ensures safe use by eliminating the possibility of misconnection of adjacent circuits
  • Internal Earth - Internal earth fitted as standard. Sized to suit cables earthing facility
  • Easy Fieldwireable - Insert assembled outside connector shell to assist wiring and allow greater flexibility
  • Multilam Technology - Tried and tested multiple high contact force, low resistance multilams used in all contacts
  • Acme Thread At Mating Interface - Unique ACME thread offers a smooth and quick fully mating action
  • Inserts are available with 1 to 4 contacts with a conductor acceptance range of between 50mm2 and 630mm2 operating up to 780A and 750V as standard. Other voltages available on special request

 

Sort by
Show result